Icom DSC CONTROLLER DS-100 - Manual (Page 11)

7
2
CALL PROCEDURE
■ Group call
q Push [CALL], then push [ √ ]
one or more times to select
‘Group call’, then push
[ENT].
w Select the desired address,
then push [ENT].
• Enter the 8 digit address when
‘Manual entry’ is selected.
e Push [CALL] and [ENT] si-
multaneously to transmit a ‘Group call’.
r Push [CLR] to stop the call.
■ All ships call
q Push [CALL], then push [ √ ]
one or more times to select
‘All ships call’, then push
[ENT].
w Select the desired category,
then push [ENT].
e Push [CALL] and [ENT] si-
multaneously to transmit an
All ships call.
r Push [CLR] to stop the call.
<Select a group>
≈ Manual entry
ICOM
<CLR"Exit / ENT"OK>
<Select a category>
Safety
≈
Urgency
<CLR"Exit / ENT"OK>
<Input an address>
ID:(8digit)
0
<CLR"Exit / ENT"OK>