Icom DSC CONTROLLER DS-100 User Manual
Page 15
WHEN RECEIVE A CALL
11
3
D
When receiving an All ships call
When receiving a Routine or
Safety all ships call, an alarm
(Pi-pi) sounds.
When you receive a distress or
Urgency all ships call, an alarm
(Pi-po) sounds with max. AF
level continuously.
• Push [CLR] to cancel the
alarm.
• Push [ENT], then the oper-
ating channel changes to received traffic channel auto-
matically.
• Push [CLR] to record the received information, then the
screen goes back to default.
You must monitor the traffic frequency until you can judge
from the call that your action has been effective and/or assis-
tance is unnecessary.
D
When receiving a Position request
When receiving a Position re-
quest call, an alarm (Pi-pi)
sounds.
• Push [ENT] to transmit your
own ships longitude and lat-
itude information.
• Push [CLR] to record the
received information, then
the screen goes back to de-
fault.
D
When receiving a Postion reply
When receiving a Position reply,
an alarm (Pi-pi) sounds.
• Push [CLR] to record the
received information, then
the screen goes back to de-
fault.
—RCV All ships call—
From:
23456789
Category: Routine
<CLR➝Exit/ ENT➝OK>
—RCV Pos request—
From:
JHON
To reply, push ENT
<CLR➝Exit/ ENT➝OK>
—RCV Pos reply—
From:
Beck
Pos.: Lat 12°34’N
Lon 123°45’W
<CLR➝Exit>