Icom DSC CONTROLLER DS-100 - Manual (Page 17)

13
3
WHEN RECEIVING A CALL
■ Received message
(RCV MSG)
When receiving a DSC call, the received format specifier and
its contents are memorized into the received message (RCV
MSG) memory. Distress calls (including other calls with dis-
tress category) are stored separately from other calls.
Up to 20 distress calls can be memorized and up 20 other
categories of calls can be memorized. However, the distress
calls are saved until being erased, while other calls are
erased when the power is turned OFF.
D Distress message
q Push [CALL], then push [ √ ]
one or more times to select
‘Received calls’, then push
[ENT].
w Select a ‘Distress message’,
then push [ENT].
e Select a desired message,
then push [ENT].
• Push [ Y ] or [ Z ] to scroll the
message.
• Push [A/a], then push [1] to
clear the message.
<Select a message>
≈ Distress message
Other message
<CLR"Exit / ENT"OK>
<Message contents>
Distress ID:
2345678
Piracy attack
Distress time & Pos
Time: UTC
12:34
Pos.: Lat 12°34’N
Lon 123°45’W
<A/a"Data clear>
<Select a message>
≈
1:Distress 12:21
2:Distress 11:21
3:Distress 10:21
4:Distress 09:21
<CLR"Exit / ENT"OK>
<Select a subject>
Entry Position/Time
Individual call
Group call
All ships call
≈ Received calls
Distress setting