Icom DSC CONTROLLER DS-100 - Manual (Page 2)

i
FOREWORD
Thank you for purchasing this Icom product. The DS-100 DSC
CONTROLLER is designed and built with Icom’s superior tech-
nology and craftsmanship. With proper care this product should
provide you with years of trouble-free operation.
IMPORTANT
READ ALL INSTRUCTIONS carefully and com-
pletely before using the controller.
SAVE THIS INSTRUCTION MANUAL— This in-
struction manual contains important operating instructions for
the DS-100.
EXPLICIT DEFINITIONS
FEATURES
☞
Class D DSC terminal
The DS-100 VHF DSC CONTROLLER is designed as a
‘Class D DSC terminal unit’ for the IC-M501EURO VHF
MARINE TRANSCEIVER .
☞
Self ID indication
The DS-100 does not function when there is no ID is pro-
grammed. Therefore, the ID code should be checked in
the Set-up menu.
INSTALLATION NOTES
In all cases, any possible risk of injury depends on the trans-
mitter being activated for long periods. (actual recommenda-
tion limits are specified as an average of 6 minutes) Normally
the transmitter is not active for long periods of time. Some
radio licences will require that a timer circuit automatically turn
the transmitter off after 1 – 2 minutes etc.
WORD DEFINITION
R WARNING
Personal injury, fire hazard or electric
shock may occur.
CAUTION Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.