Insignia NS-R5101 - Manual (Page 23)

23
Insignia NS-R5101 5.1 Surround Sound A/V Receiver
www.insignia-products.com
Installing batteries
To install the batteries:
1 Remove the cover.
2 Load two type AAA batteries into the
compartment matching the polarity indicated.
3 Replace the cover.
Using the remote control
Use the remote control by pointing it towards the
receiver’s remote sensor window. Objects
between the remote control and sensor window
may prevent proper operation.
Use the remote control within about 23 feet
(7 meters) of the receiver and within 30 degrees
of perpendicular to the front of the receiver.
11
SELECT button
“Navigating through the setup
menu” on page 17.
12 Input selector buttons “Using your receiver” on page 24.
13 TONE MODE button “Using your receiver” on page 24.
14 SOUND PARAMETER
button “Adjusting the sound parameters”
on page 21.
15 STEREO button “Listening to radio broadcasts” on
page 27.
16 TEST tone button “Adjusting each channel level with
test tone” on page 22.
17
SELECT button
“Navigating through the setup
menu” on page 17.
18
SELECT button
“Navigating through the setup
menu” on page 17.
19 DISPLAY button “Displaying the receiver status” on
page 30.
20 DIGITAL INPUTS
button “Using your receiver” on page 24.
21 PRESET SCAN button “Tuning to preset stations” on
page 28.
22 Numeric keypad
23 POWER ON button “Using your receiver” on page 24.
Caution
Do not use Ni-Cd rechargeable batteries in this
remote control.
Note
Remove the batteries if they are not to be used for
a long period of time.
Item Description For more information, see...
Caution
• Do not expose the remote control to shock. In
addition, do not expose the remote control to
liquids, and do not place in an area with high
humidity.
• Do not place the remote control under direct
sunlight. The heat may cause deformation of
the remote control.
• The remote control may not work properly if the
remote sensor window of the receiver is under
direct sunlight or strong lighting. In such a
case, change the angle of the lighting or
receiver, or operate the remote control closer to
the remote sensor window.
23’ (7m)