Insignia NS-R5101 - Manual (Page 25)

25
Insignia NS-R5101 5.1 Surround Sound A/V Receiver
www.insignia-products.com
5 If you selected CD, VIDEO1, or VIDEO2 as
the input source, you can press the DIGITAL
INPUTS button to select the digital or analog
audio input.
6 Turn the MASTER VOLUME dial or press the
VOLUME / buttons to adjust the sound
level.
-OR-
Press the MUTE button to turn the sound off.
MUTE flickers on the display. Press the
MUTE button again to turn the sound back
on.
Adjusting the treble and bass
To adjust the treble and bass:
1 Press the TONE MODE button to enter the
tone mode. The tone mode is displayed for
several seconds.
2 Press or to select the tone mode.
3 With the Tone mode set to ON, press the
or .
Note
Each time the DIGITAL INPUTS button is
pressed, the audio input source changes as
follows:
•
Optical (O)
• Coaxial1 (C1)
• Coaxial2 (C2)
• Analog (A)
Notes
• When TUNER, AUX, TAPE, EXTERNAL IN, or
VIDEO3 is selected as an input source, the
analog input is selected automatically.
• If the selected digital input is not connected,
the DIGITAL indicator flickers and the analog
input is automatically selected.
• The selected digital or analog input is
automatically assigned to the corresponding
input source on the INPUT setup menu. For
more information, see “Modifying the input
settings” on page 18. If you do not hear the
sound you expect, press DIGITAL INPUTS
until you hear the sound you want.
• The sound from the component connected to
the selected digital input can be heard
regardless of the selected input source.
OR
OR
Note
When EXTERNAL IN is selected as an input
source, you can not select the tone mode or adjust
the tone.
Note
Each time you press these buttons, the tone mode
changes as follows:
•
OFF: To listen to a program source without the
tone effect. DIRECT appears on the display.
• ON: To adjust the tone to your taste. DIRECT
disappears from the display.
Note
Each time you press these buttons, the tone mode
changes as follows:
•
TRBL
• BASS
• TONE ON
OR
OR