Using the sleep timer, Adjusting the display brightness, Using the sleep timer” o – Insignia NS-R5101 User Manual

Page 29

Advertising
background image

29

Insignia NS-R5101 5.1 Surround Sound A/V Receiver

www.insignia-products.com

Dubbing from video components onto VIDEO1
(VCR or DVDR)

To dub from video components onto VIDEO1:

1 Select the video source (VIDEO2 or

VIDEO3).

2 Start recording on the video recorder.

3 Start play on your input device.

Dubbing from audio and video signals separately
onto VIDEO1

Use this procedure if you are dubbing the video
from VIDEO2 and mixing it with the audio from
the CD audio onto VIDEO1.

To dub from video components onto VIDEO1:

1 Select VIDEO2 as the video recording

source.

2 Select CD as the audio recording source.

3 Start recording on the video recorder.

4 Start play on the video source and on the CD

source.

Using the sleep timer

The sleep timer automatically turns the receiver
off after a specified period of time.

To use the sleep timer:

Press the SLEEP button to specify the
amount of time you want the receiver to play.

Each time this button is pressed, the time
changes as follows:

10 minutes

20 minutes

30 minutes

...

90 minutes

OFF

Adjusting the display brightness

To adjust the display brightness:

Press the DIMMER button to specify the
brightness of the display.

Each time this button is pressed, the
brightness changes as follows:

ON

dimmer

OFF

Note

The audio and video signals from the input are
dubbed onto the VIDEO1 recorder. You can view
them at the same time on the television and hear
them from the speakers.

Notes

The audio and video signals from the inputs
are dubbed onto the VIDEO1 recorder. You can
view them at the same time on the television
and hear them from the speakers.

Make sure that you follow the order of steps 1
and 2.

OR

OR

OR

Note

While operating the sleep timer, the

lights up.

Note

If the display is off, pressing any button turns the
display on.

Advertising