Intel SR1500AL - Manual (Page 54)

32 Intel
®
Server System SR1500AL User’s Guide
Figure 23. Installing the Memory
6. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the
open position (see letter “A” in the figure above).
7. Holding the DIMM by the edges, remove it from its anti-static package.
8. Position the DIMM above the socket. Align the notch on the bottom edge of the
DIMM with the key in the DIMM socket. The arrow in the inset in Figure 23 is
pointing to the key in the socket (see letter “B” in the figure above).
9. Insert the bottom edge of the DIMM into the socket.
10. When the DIMM is inserted, push down on the top edge of the DIMM until the
retaining clips snap into place (see letter “C” in the figure above). Make sure the
clips are firmly in place (see letter “D” in the figure above).
TP02072
DIMM A1
Socket
DIMM A2
Socket
DIMM B1
Socket
DIMM B2
Socket
DIMM D2
Socket
DIMM D1
Socket
DIMM C2
Socket
DIMM C1
Socket
A
C
D
B