Intel SR1500AL - Manual (Page 72)

50 Intel
®
Server System SR1500AL User’s Guide
Figure 40. Removing the PCI Express* Riser Card from the Server System
10. Install the replacement riser connector, if desired. For instructions, see “Installing
the PCI-X* Riser Card into the Server System” .
11. Install the PCI add-in card(s) if desired. For instructions, see “Installing a PCI Add-
in Card” .
12. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” .
13. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.
14. Re-install the processor air duct. For instructions, see “Installing the Processor Air
Duct” .
15. Install the server system cover. For instructions, see “Installing the System Cover” .
16. Plug all peripheral devices and the AC power cable(s) into the server.
AF000359
A
B
C