Intel SR1500AL - Manual (Page 84)

62 Intel
®
Server System SR1500AL User’s Guide
Installing and Removing the Server Board
Installing the Server Board
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” .
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the server system cover. For instructions, see “Removing the System
Cover” .
4. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” .
5. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” .
6. Place the server board into the server system as shown in the figure below (see
letter “A”).
7. Attach the server board with six screws (see letter “B”).
Figure 52. Installing the Server Board
A
B
AF000379