Novell netware driver installation, Initio, Overview – Initio I/O HIGHWAY User Manual

Page 39: Installation

Advertising
background image

35

initio

®

Overview

I/OHIGHWAY will support Novell NetWare 386 V4.XX or V3.1X with the addition of a

software driver. The installation procedure described here requires some experience in

Novell system setup and administration. The device driver is transferred from the

INI-

9XXXU/9XXXUW DRIVER DISK 1

to the hard drive where it is automatically initialized

during the system boot routine. The device drivers listed can support NetWare versions

described after the Initio file name:

\NETWARE\V31X\INI910U.DSK

Initio Novell adapter driver for V3.1X

\NETWARE\V31X\ASPITRAN.DSK

ASPI transport layer driver for V3.1X

\NETWARE\V4X\INI910U.DSK

Initio Novell adapter driver for V4.X or later

\NETWARE\V4X\INI910U.DDI

Device driver installation file

\NETWARE\V4X\ASPITRAN.DSK

ASPI transport layer driver for V4.X or later

\NETWARE\HAM\INI9100.HAM

HAM device driver

\NETWARE\HAM\INI9100.DDI

HAM device driver installation file

Installation

The drivers developed by Initio for NetWare will be installed on the disk drive used for

NetWare system initialization. It is strongly recommended that the selected procedure be

read and understood before continuing with the system configuration or change. Please

read the instructions carefully.

New IntraNetWare Installation

Drivers for the Initio host adapter may be found on the

INI-9XXXU/9XXXUW DRIVER

DISK 1

. In most cases you will load the drivers during a new installation of NetWare from

CD-ROM. The driver is loaded during the NetWare Server Installation procedure. The

NetWare installation program will prompt you for the required parameters as the installa-

tion procedure progresses. It is highly recommended that you have a copy of the Novell

NetWare Installation and Upgrade Manual for reference.

1 At the MS-DOS prompt for CD-ROM installation, change directories to where the

installation files are located.

e.g., d:\ <ENTER>

2 Type INSTALL <ENTER> to initialize the installation routine
3 Select installation Language. <ENTER>.
4 Select NetWare Server Installation <ENTER>
5 Select product type <ENTER>

Novell NetWare Driver Installation

8

Advertising