Initio I/O HIGHWAY - Manual (Page 9)

5
initio
®
Getting Started
Host Adapter and the SCSI Bus
I/OHIGHWAY is a bus mastering host adapter which works with the host computer to
provide control for the SCSI bus. By daisy chaining peripheral devices together, up to
seven devices can be linked with I/OHIGHWAY . The host adapter can be placed in any
standard PCI slot on the bus.
SCSI bus preparation
Each peripheral device attached to the SCSI bus can either be an internal or external
device. Each peripheral has a specific device ID, commonly referred to as a SCSI ID.
Please refer to your peripheral documentation to determine switch or jumper settings for
SCSI ID’s. No two devices can have the same ID; the device ID uniquely defines the
device to the SCSI bus.
SCSI bus termination
The SCSI bus structure has a length limitation as well as a requirement for termination at
each end of the SCSI cable. The cable is designed to connect in a daisy chain fashion.
No branching is permitted in the SCSI bus. The first and last physical SCSI device on
the SCSI bus must be terminated (
FIGURE 2
).
FIGURE 2 – Examples of SCSI bus termination
2