ILY Enterprise CoolCopy 7 User Manual

Page 16

Advertising
background image

Copyright

©2005 by ILY Enterprise Inc.

All Rights Reserved.

16

If comparison fails, LCD will show the number of discs

failed and succeeded.

Press ENT to see the comparison

information.

If the comparison fails, the LCD will show

the reason as follows:

4.9.5 Select Partition

This function is to select a partition in the hard disc.

Press ENT button to change the setting.

After installing a hard disc, duplicator will format it automatically. Each partition occupies 1GB.

The number of partitions is dependent on the hard disc’s capacity. The partitions are

alphabetically arranged.

Use arrow button to select which partition will

be worked.

When the partition is set, the LCD will show the

following:

4.9.6 Select Src Drive

This function selects CD-ROM or any CD writer as the source from which you can load data into

a particular partition as an image file.

Press ENT and arrow button to select

the source.

Then use arrow button to select the disc as the master

source.

After selecting the source, press ENT.

LCD will show the source information the following info:

4.10 Edit Track

Compare OK

:

0

Fail

:

1 Diff

:

0

Src

:

01 CD-ROM

Total

:

0 Bytes


Src

:

02 CD-RW

TOC not match

9

-

05

.

Image P

:

A

Select Image

Select Working

Partition - A

Set Partition to

A

9

-

06

.

Image P

:

A

Image Src Drive


Select Img Src

:

01 IDE0 CD-ROM

Load image from

Drive ID-01

Advertising
This manual is related to the following products: