ILY Enterprise CoolCopy 7 - Manual (Page 27)

Copyright ©2005 by ILY Enterprise Inc.
All Rights Reserved.
27
Use arrow button to change setting to Disk.
Then press ENT or ESC to go back to the 12-
05 menu.
Use arrow button to change setting to Parti.
Then, press ENT or ESC to go back to the 12-05 menu.
4.12.6 Burn-in
This function is a burn-in test, which will simulate the copying process multiple times. After each
cycle, the CDs on the CD writers will be ejected automatically and re-inserted again for
continuous testing.
Press “ENT” button to enter “Burn-in” and
“ESC” to exit
The data will not be written on the blank
CD discs and the discs will remain blank
after the test.
.
Using arrow button to change
“RunContinuous”, “1~10”, “10~100”,
“100~1000” setting. Press “ENT” or “ESC”
button to go back 12-06 menu.
The system will repeat to erase and write
on the CD-RW discs. Only CD+RW discs can
be rewritten.
Using arrow button to change
“RunContinuous”, “1~10”, “10~100”,
“100~1000” setting. Press “ENT” or “ESC”
button to go back 12-06 menu.
4.12.7 Update Firmware
This function will update your firmware to the latest version. Insert the CD disc which contains the
latest firmware data (firmware CD disc) into the CD-ROM drive and the duplicator will find the
data and update its firmware automatically. During updating, do not turn off the power of machine
because the update will not be finished until machine resets itself.
The Update Firmware function updates firmware to the latest version.
2. Unzip the firmware you have and write the file “ cdxxx.bin ” into the root directory of a blank
CD-R or CD-RW disc. You have to close the session of the CD. If the same CD disc still has
capacity to add more data, it can be used to store newer versions of firmware. When updating the
firmware program from the CD, only the one from last session will be used. Versions from
previous sessions will be ignored.
Select source drive to CD-ROM first! Then
press “ENT” button to enter “UpdateFirmware”
and “ESC” to exit.
Verify Disk or
Partition? Disk
Verify Disk or
Partition? Parti
12-06. Adv Setup
Burn-in
Burn-in
Test
Sel burn-in num:
Run Continuous
Burn-in
Erase&Copy
Sel burn-in num:
Run Continuous
12-07. Adv Setup
Update Firmware