ILY Enterprise CoolCopy 7 - Manual (Page 18)

Copyright ©2005 by ILY Enterprise Inc.
All Rights Reserved.
18
LCD will show copying information as follows:
The 2/2 means the second track of all tracks you have
selected. So far you have selected two tracks from two
different CDs.
When copying is finished, the LCD will show the
following message:
The system will ask if you want to continue editing. Use arrow
button to select “no” then press
ENT.
The system will ask to close the disc session.
Use arrow button to make “Yes” or “No”
selection.
LCD will show the following screen
when you are closing the session:
4.10.2 CD to HDD
This function lets you select one or more tracks from CD-ROM and then copy the source into a
certain HDD partition.
Press ENT to enter the setting.
Follow the LCD to select the track that you want
to edit. Here 1/10 means the number one of 10 tracks
and 3:25 means the playing time.
Press ENT button to select the track. After the
track is selected, the “+” will appear. Pressing
ENT again will cancel the track.
When track selection is made, use arrow button to
move to the “End” manual.
Press ENT to finish the disc editing. Use arrow
button to make a selection.
The source will be loaded to hard drive. LCD
will show the loading information as follows:
When the “Image Load” is finished, the LCD will
show the message as follows:
The system will ask if you want to continue editing. Use the arrow
Copying- 24X Edit
1/10 - > 2/2
Burn Complete!
OK : 03
Continue edit
next Disc?No
Close all disc’s
session? Yes
Closing Session
Please wait---
10-02 . Edit Track
CD to HDD Edit
Select Track :
1/10 03 : 25
Select Track :
+1/10 03 : 25
Select Track :
End 1Trk03 : 25
End edit disc
and burn?Yes
Load- P0 -24X Edit
1/10 - > 1/1
Image load OK