ILY Enterprise CoolCopy 7 - Manual (Page 22)

Copyright ©2005 by ILY Enterprise Inc.
All Rights Reserved.
22
4.11.6 Auto Verify
This setting allows you to automatically verify if target CDs can be read after copying.
Press ENT button to enter the following figure:
Use arrow button to change the “On” or “Off”
setting. Then press ENT or press ESC to go
return to 11-06 menu.
4.11.7 Auto Compare
This setting allows you to automatically compare the source CD and target CDs after copying.
Press ESC button and arrow to enter setting.
Use arrow button to change “On” or “Off”
setting. Then press ENT to go
back 11-07 menu
4.11.8 Auto Prescan
This setting allows you to automatically scan if the source CD can be read correctly and also tests
the reading speed.
Press ENT button to enter Auto Prescan.
Use arrow button to change “On” or “Off” Setting.
Then press ENT or press ESC to return to 11-08 menu.
4.11.9 Eject Disc
Eject disc allows three choices: Eject Good Only, Eject All Disc and Do Not Eject.
Press ENT button to enter the following figure:
Use arrow button to select Eject Good Only.
Then press ENT or press ESC to return to 11-
09 menu.
11-06. Setup
Auto Verify
Auto Verify
Off
11-07. Setup
Auto Compare
Auto Compare
Off
11-08. Setup
Auto Prescan
Auto Prescan
Off
11-09. Setup
Eject Disc
Eject Disc
Eject Good
Only