Connections, Cable network diagram, Iris connections with integrated upconverter – I.R.I.S. DC1100 User Manual

Page 19: Iris connections with an external upconverter

Advertising
background image

Coaxial Networks, Inc.

Page 19 of 60

Connections

Cable Network Diagram

IRIS Connections with Integrated Upconverter


IRIS model numbers DC1100 and DC1100C come with an integrated upconverter. The following
diagram illustrates the connections.

Diplexer

TO DISTRIBUTION

Diplexer

UPLINK

CONSOLE

PWR

TX

RX1

ACT

RF ON

IRIS Rear Panel

Figure 5 Connections with Integrated Upconverter

)

If in your headend you are using passive equipment such as combiner which does
not allow return signals, make sure that the connections are made in such a manner
that return signals are not affected by such equipment.

IRIS Connections with an external Upconverter


IRIS model numbers DC1100X and DC1100CX come without an integrated upconverter. You
will need an external DOCSIS upconverter to connect IRIS to your cable system. The following
diagram illustrates the connections when using IRIS with an external upconverter.

Advertising
This manual is related to the following products: