IBM Partner Pavilion iLC300 - Manual (Page 13)

Chapter 2. Setting up the projector
This chapter provides information on positioning the projector, connecting a
computer source, using the projector with Windows
® 98, and displaying and
adjusting a computer source image.
Note: You can use your projector with Presentation Director to plan and give
presentations with confidence. You can ensure that your computer and
display will not turn off or go blank during a presentation, be sure your
graphics and text will be crisp and clear, and save important display settings
for future presentations with the same equipment. For additional
information on Presentation Director, visit the www.ibm.com/pc/support
Web site and search for
″Presentation Director.″
Required computer connections
1. Connect the black end of the computer cable to the Computer 1 connector on
the projector.
2. Connect the blue end to the video port on your computer. If you are using a
desktop computer, you first need to disconnect the monitor cable from the
computer’s video port.
computer 1 computer 2 computer 2
video
monitor network
serial control
audio in
audio in audio in
audio out
R
R
L
L
Y
Pr
Pb
s-video
computer in
3. Connect the black power cable to the connector on the back of the projector
and to your electrical outlet.
The Power LED on the projector’s keypad turns solid green.
Note: Always use the power cable that shipped with the projector.
computer 1 computer 2 computer 2
video
monitor network
serial control ial control
audio in audio in
audio in audio in audio in audio in
audio out
R
R
L
L
Y
Pr
Pb
s-video
computer in computer in
Optional computer connections
© Copyright IBM Corp. 2003 3