IBM Partner Pavilion iLC300 User Manual
Page 33
NND:
Prevents your notebook computer from going into Screen Save mode.
Power Save:
Automatically turns the lamp off after no signals are detected for 20
minutes. After 10 additional minutes with no signal, the projector powers down. If
an active signal is received before the projector powers down, the image will be
displayed.
Screen Save:
Automatically blanks the screen with a black color after no signals
are detected for a preset number of minutes. The image returns when an active
source is detected or a remote or keypad button is pressed. Screen Save is disabled
when Power Save is enabled.
Startup Logo:
Allows you to display a blank Black, White, or Blue screen instead
of the default screen at startup and when no source is detected.
Blank Screen:
Determines what color displays when you press the Blank button on
the remote or there is a blank screen when no source is active.
Effect Key:
Allows you to assign a different function to the Effect button on the
remote to quickly and easily use the effect. Only one effect can be enabled at a
time. Highlight an effect and press Select to choose a different one.
v
Blank:
Shows an empty screen.
v
Mute:
Turns off all sound.
v
Aspect Ratio:
Sets the ratio of the image width to image height.
v
Source:
Cycles through the available sources.
v
Auto Image:
Causes computer sources to be re-acquired.
v
Freeze:
Pauses the projected image.
v
Zoom:
Lets you magnify a part of the screen. To use the Zoom effect, press
Effect
, then press the remote’s mouse left-click to zoom the image, press the
mouse right-click to decrease the magnification. You can use the cursor control
Chapter 5. Using the menus
23