IBM Partner Pavilion iLC300 User Manual
Page 38
Problem
Solution
Edges of image distorted
Turn overscan on in the Picture ->
Advanced
menu.
Image not sharp
Adjust sharpness in the Picture ->
Advanced
menu.
Image does not fit 16:9 screen
Change aspect ratio to 16:9 in the Picture ->
Aspect Ratio
menu.
Image upside down
Turn off Ceiling in Settings -> System
menu.
Image reversed
Turn off Rear in Settings -> System menu.
Video image
″torn″ or fragmented
Change Video Standard in Picture ->
Advance
menu.
Projected colors do not match source
Adjust color, tint, color temperature,
brightness, and/or contrast in the menus.
Lamp won’t turn on; LED blinking red
v
Make sure vents are not blocked; allow
projector to cool for one minute, or
v
Replace lamp (see “Replacing the
projection lamp” on page 25).
Image not centered on screen
v
Move projector; adjust zoom and/or
height, or
v
Adjust horizontal or vertical position in
the Picture -> Advanced menu.
28
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide