Intermec 70 - Manual (Page 119)

Troubleshooting
7-3
7
This chapter helps you troubleshoot problems you may experience with the Intermec
Model 70 Pocket PC.
Resetting the Pocket PC
You can perform a soft reset or a full reset. If your Pocket PC responds slowly, stops
responding as expected, or “freezes,” try soft resetting it. If you want to clear all data
from your Pocket PC and return it to the factory defaults or if you forget your Pocket
PC password, you need to perform a full reset and clear the memory.
Performing a Soft Reset
A soft reset causes the Pocket PC to restart and re-adjust memory allocation. Unsaved
data in open windows may be lost.
To perform a soft reset
• Use the stylus to press and hold the Reset button for about two seconds.
Clearing Memory (Resetting to Factory Defaults)
Caution
Clearing memory deletes all data and restores the Pocket PC to its default settings.
Programs installed at the factory remain, while data you have created and programs
you have installed are erased.
Conseil
L’effacement de la mémoire supprime toutes les données et rétablit les paramètres par
défaut du Pocket PC. Les programmes installés en usine sont conservés. Cependant,
les données que vous avez créées et les programmes que vous avez installés sont
effacés.
Note: Make sure you back up your Pocket PC data so that if you need to clear memory,
you can restore the data on your Pocket PC. For more information, see “Backing Up and
Restoring Data” in Chapter 2.