Modem connection problems – Intermec 70 User Manual

Page 125

Advertising
background image

Troubleshooting

7-9

7

Modem Connection Problems

You may encounter the following problems when using a modem. Additional
troubleshooting information is available in the Connections online help on the Pocket
PC and in the ActiveSync online help on the desktop computer.

Can’t Dial Out

• Remove your Pocket PC from the cradle. You cannot connect using a modem if

your Pocket PC has an active connection with the desktop computer.

• Verify that the modem is firmly seated and connected to your Pocket PC and the

telephone jack.

• Make sure the telephone line is analog. (Analog telephone lines transmit data in

analog instead of digital form. Your home telephone line is most likely analog,
while office telephone lines are often digital.)

• If you create a modem connection for an external modem, select Hayes

Compatible on COM1

as your modem. If you are using a modem card, select the

modem card as your modem.

• To use an external modem, you need to use a NULL modem cable and appropriate

adapters to connect the external modem to your Pocket PC.

• Make sure the modem is waiting for a dial tone. Tap

and then Settings. On the

Connections

tab, tap Modem. Tap your connection and tap Next twice. Make sure

Wait for dial tone before dialing

is selected.

• For international calls, allow more time for the call to go through. Tap

and then

Settings

. On the Connections tab, tap Modem. Tap your connection and tap Next

twice. Clear Cancel the call if not connected within or increase the number of
seconds allowed. For information on dialing patterns, see Connections Help on the
Pocket PC.

Can Dial Out but Cannot Make a Proper Connection

• Make sure the network to which you are trying to connect supports the Point-to-

Point Protocol (PPP). Your Internet service provider or network administrator can
verify this.

• Verify that the location is correct. Tap

and then Settings. On the Connections

tab, tap Modem. On the Dialing tab, make sure that Location reflects your current
location. Tap Dialing Patterns to make sure the correct sequence of numbers is
being dialed. For information on dialing patterns, see Connections Help on the
Pocket PC.

Advertising