Jensen VM9424 - Manual (Page 20)

15
VM9424
Adjusting a Feature
1. Use the touchscreen or press the / buttons (26, 27) on the remote
control to highlight the audio feature to be adjusted.
2. Use the touchscreen or press the OK button (30) on the remote control to
view submenu choices.
3. Use the touchscreen or press the / buttons (26, 27) on the remote
control to highlight the audio feature to be adjusted.
4. Enter the option field for the feature you want to adjust by using the
touchscreen or pressing the OK button (30) on the remote control.
5. Select a new value by using the touchscreen or pressing the / buttons.
6. Press OK to confirm.
General Sub-menu Features
Setting Options Function
Clock (HH:MM) Clock appears in the top right corner of the screen and
on the LCD screen during certain operations. NOTE:
The AM/PM indication will change as you continue to
adjust the hour past 12.
AM/PM AM Set AM or PM when using 12Hr clock mode.
PM
Clock Mode 12Hr Clock displays 12 hour time using AM and PM.
24Hr Clock displays 24 hour time up to 23:59.
Beep Off No beep sounds.
On When turned on, an audible beep tone confirms each
function selection.
Camera Image Normal Reverse the camera image as if looking through a rear-
view mirror.
Mirror
Bluetooth On Connect the last active mobile phone by touching the
Pair icon when disconnected.
Off Automatically connect when your paired phone is in
range.
Auto Dimmer On Select to automatically dim screen at dusk.
Off
Start Volume Last Set radio volume at turn-on to last volume level or
choose “adjust” to turn on at a pre-defined level.
Adjust
Start Vol.
Adjust 40-0 Pre-defined automatic turn-on volume level.
Version View radio software version information.