Jensen VM9424 - Manual (Page 55)

50
VM9424
REAR CAMERA FUNCTION
This unit is “camera ready.” Before accessing any camera features, you must
install a rear video camera. When the camera is not installed and the function
is accessed by gear selector being placed in reverse or by the unit’s menu, the
message “VIDEO NOT DETECTED” will appear, indicating the function is not
available.
When the camera is installed, the rear view image of what’s behind the vehicle
will appear when the vehicle’s is placed in reverse gear. When leaving reverse
gear, the unit displays the previous screen. The rear camera image can be
adjusted from Normal to Mirror using the “Setup” menu (“General Sub-menu
Features” on page 15).