Jensen VM9424 - Manual (Page 26)

21
VM9424
Using Preset Stations
Six numbered preset buttons store and recall stations for
each band. All six stored stations (P1-P6) for the current
band appear on the screen.
Storing a Station
1.
Select a band (if needed), then select a station.
2. Press and hold the on-screen preset channel location
(9) on the right side of the screen to store the current
station.
3. The preset number and station appears highlighted.
NOTE: Press the button to view the 6th preset channel.
Recalling a Station
1.
Select a band (if needed).
2. Press an on-screen preset channel location (9) to select the
corresponding stored station.
Auto Store/Preset Scan (AS/PS)
Preset Scan (PS)
To hear a preview of stored preset stations:
1. Press the on-screen button to view the second row of buttons.
2. Press the on-screen AS/PS button.
3. Press again to stop preset scan.
Auto Store (AS)
To select six strong stations and store them in the current band:
1. Select a band (if needed).
2. Press the on-screen button to view the second row of buttons.
3. Press and hold the on-screen AS/PS button to activate the Auto Store
function. The new stations replace stations already stored in that band.
Local Radio Station Seeking (LOC)
When the Local function is on, only radio stations with a strong local radio
signal are played. To activate the Local function in AM/FM tuner mode:
1. Press the on-screen button to view the second row of buttons.
2. Press the Loc/DX button to toggle Loc (local) and Dx (distant) tuning
modes.
1 87.50MHz
2 90.10MHz
3 98.10MHz
4 106.10MHz
5 107.90MHz