Vm9424 accessing the dvd menu, Direct search, Search – Jensen VM9424 User Manual
Page 30
25
VM9424
Accessing the DVD Menu
Press the MENU button (1) on the remote control to recall the main DVD
menu. Use the directional (arrow) buttons on the remote control to select a title
from the menu or touch the title on screen.
For DVD’s with more than one title, press the TITLE button (2) on the remote
control to select a different title for playback. Press the OK button (30) on the
remote control to confirm your selection and begin playback. You can also
select a title using the touch screen.
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to repeat.
•
Press the A
B button (6) on the remote control (or the
button on
screen) to set the start point (A) of the repeated section.
•
Press the A
B button again once you reach the desired end point (B) of
the repeated section. The selected portion of the DVD will now repeat
continuously.
•
Press the A
B button again to cancel the A-B section repeat.
Direct Search
During DVD or VCD playback, perform the following steps to use the GOTO
feature to access a specific location on a disc:
1.
Press the SRCH button (11) on remote control to access the “Search”
screen.
2.
Use the touch screen or press the or buttons (27, 26) on the remote
control to select a category.
•
Title – Go to specific title
•
Chapter – Go to specific chapter
•
Time – Go to specific time in current title
NOTE: Only the Track and Time fields are available when searching VCD
discs.
3.
Enter a time into the field using the on-screen keypad or the numeric
keypad (31) on the remote control. Press the button to backspace.
4.
Press the OK button on screen or on the remote control (30) to go to the
specified location on the disc.
R
A
1
2
3
4
5
6
7
8
9
0
OK
Title
_ _ _
Chapter _ _ _
Time _ _ : _ _ : _ _
SEARCH