Jensen VM9424 User Manual
Page 51
46
VM9424
Volume Control
To increase or decrease the volume level, turn the VOL rotary encoder (5) on
the front panel or press the VOL+/ VOL- buttons on the remote control (16,
15).
Making an Outgoing Call
Outgoing calls can be made using the direct dial screen or by selecting a
number from the “Call Logs” screen (see “Call Logs” on page 46). To make a
call from the direct dial screen:
1.
Touch Phone Dial to view the direct dial screen.
2.
Use the 0-9, */+ and # buttons to input the phone number.
•
Touch the C button to clear the last digit.
•
Touch the
button to clear the entire number and start over.
3.
After entering the phone number, press the
button to dial the call.
4.
To end the conversation, press the
button.
Call Transfer
While talking, to transfer audio from the head unit back to the mobile phone,
touch the
button. You can only transfer a call after it has been answered.
Press
again to transfer the call back to the head unit.
Call Logs
The Bluetooth menu appears on the right side of the screen. Touch Call Logs
to view stored contact information.
NOTE: Not all phones allow access to missed, received or dialed calls
and some will not allow uploading of your phone’s address book.
1
2
3
C
4
5
6
7
8
9
0
#
/
*
+