Operations on vcr deck, Playback on vcr deck, Basic playback – JVC HR-XVC32SUJ User Manual

Page 16: During playback, When the tape is not running

Advertising
background image

16

Variable Speed Search (including slow-motion)
Press

1 REW or FF ¡ repeatedly.

• Press

3 PLAY to resume normal playback.

• Each time you press

1 REW or FF ¡, the playback speed

changes. To decrease the speed during picture search, press
the opposite direction button repeatedly.

Reverse search
3 steps

Slow
motion

Normal
play

Forward search
2 steps

• During still picture, holding

8 PAUSE for more than 2

seconds starts forward slow motion playback.
If you press

8 PAUSE again, still picture resumes.

• During slow motion playback, some noise may appear on the

TV screen. Press CH + or to eliminate the noise.

When the tape is not running

Rewind/fast-forward at high speed
Press

1 REW or FF ¡.

Eject the cassette
Press

0 EJECT on the unit.

• You can also eject the cassette when the recorder is

turned off.

Turn off the unit
Press POWER.

NOTE:

In the search, still, slow-motion or frame-by

-

frame playback

mode,
• the picture will be distorted
• the noise bars will appear
• there will be a loss of color with an LP-recorded tape

Playback on VCR Deck

Basic Playback

• Turn on the TV and select the VCR channel (or AV

mode).

• Slide the TV/VCR/DVD switch on the Remote to the

right.

~

Load a cassette.

Make sure the window
side is up, the rear label
side is facing you and the
arrow on the front of the cassette is pointing towards the
recorder.
• Do not apply too much pressure when inserting.
• The unit turns on, and the counter is reset

automatically.

• If the cassette’s record safety tab has been removed,

playback begins automatically.

Ÿ

Select the VCR deck.

Press VCR on the Remote so that the VHS indicator
lights up on the front display panel.

!

Start playback.

Press

3 PLAY.

During playback

Stop playback
Press

7 STOP on the Remote.

Pause playback and view still picture
Press

8 PAUSE.

• Press

3 PLAY

to resume normal playback.

• If there is vertical jitter, press CH + or to correct the

picture.

Pause and Frame-by-Frame playback
Press

8 PAUSE to pause, then press 8 PAUSE

repeatedly.

• Press

3 PLAY

to resume normal playback.

Reverse

Forward

12-19_HR-XVC32SUJ.indd 16

12-19_HR-XVC32SUJ.indd 16

05.4.21 6:30:36 PM

05.4.21 6:30:36 PM

Advertising