JVC GR-DVL9000 - Manual (Page 73)

EN
73
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
10. The tape is moving, but
there’s no picture.
11. In the 5-Second mode,
recording ends before
5 seconds have elapsed.
12. Pro Snapshot mode
cannot be used.
13. Digital Zoom doesn’t
work.
14. P.AE/Effects and Fade/
Wipe Effects don’t work.
15. The Black & White Fader
doesn’t work.
16. The Dissolve function
doesn’t work.
17. Scene transition does not
go as expected.
10. •Your TV has AV input
terminals, but is not set to
its VIDEO mode.
•The cassette’s cover is open.
11. •The 5-Second mode in the
System Menu is set to
“ANIM.”.
12. •The Squeeze mode is
selected.
13. •10X optical zoom is selected.
•The Video Echo effect is
activated.
•Picture Wipe or Dissolve
are being used in a scene
transition.
•5-Second recording was
done with the Power Dial
set to “5S”, and with “5SD”
selected in the System Menu.
•Pro Snapshot was attempted
during Digital Zoom.
14. •The Power Dial is set to
“ A ”.
•The Power Dial is set to
“5S”.
15. •The Sepia or Monotone
effects are activated.
16. •P.AE/Effect Sepia,
Monotone or Slow is
activated.
•The Squeeze mode is
selected.
•The previously selected
P.AE/Effect was changed
after the last selected scene
for editing was registered.
17. •When using “Picture Wipe/
Dissolve” (
੬
pg. 40) or
“Dissolves during 5 second
mode recording” (
੬
pg. 28),
there is a delay of a fraction
of a second between the
previous record stop-point
and the Dissolve start-point.
This is normal, but this slight
delay becomes especially
noticeable when shooting
fast-moving subject or
during rapid panning.
10. •Set the TV to the mode or
channel appropriate for
video playback (
੬
pg. 58).
•Close the cassette's cover
(
੬
pg. 14).
11. •Select “5S” or “5SD” in the
System Menu (
੬
pg. 37).
12. •Disengage the Squeeze
mode (
੬
pg. 34).
13. •Turn off the Video Echo
effect (
੬
pg. 45).
•Wait until the Picture Wipe
or Dissolve effects are
completed (
੬
pg. 40).
•Change the setting of either
the System Menu or the
Power Dial (
੬
pg. 36).
•Do not attempt to take a
Pro Snapshot when
performing Digital Zoom
(
੬
pg. 28).
14. •Set the Power Dial to “
M
”
(
੬
pg. 19).
•Change the setting of the
Power Dial.
15. •Turn off Sepia and
Monotone (
੬
pg. 44).
16. •Turn off Sepia, Monotone
or Slow before adding
Dissolve to a scene
transition (
੬
pg. 44).
•Make sure that the Squeeze
mode in the Recording
Menu is set to “OFF”
(
੬
pg. 34).
•Make sure you have
selected the P.AE/Effects
you want before starting
editing (
੬
pg. 44).
17.
————
CONTINUED ON NEXT PAGE