JVC GR-DVL9000 - Manual (Page 74)

74
EN
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
18. •The last selected editing
scene is ending.
•At the end of the last
selected scene for editing,
the Power Dial was set to
“OFF”.
•The power is off.
19. •The Slow Shutter effect is
activated.
•The Squeeze or Cinema
mode is selected in the
Recording Menu.
20. •When shooting in the dark,
the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow Shutter.
21. •The Picture Wipe or
Dissolve functions are in use.
•The Squeeze mode is
selected in the Recording
Menu.
•A Fade-In or Fade-Out is in
progress (White Fader, Black
Fader or Black & White
Fader).
22. •The Picture Wipe or
Dissolve function is in use.
23. •The Sepia or Monotone
effect is activated.
24. •This is a result of
exceedingly high contrast,
and is not a malfunction.
25. •This is not a malfunction.
18. • Select Picture Wipe or
Dissolve before beginning
recording. The effects are
then automatically
activated (
੬
pg. 40).
• Do not turn off the
camcorder’s power after
setting Edit-In and Edit-Out
points, as they will all be
erased (
੬
pg. 40).
• The camcorder
automatically shuts off
after 5 minutes have
elapsed in the Record-
Standby mode. Make
sure you continue
operations within
5 minutes after engaging
Record-Standby mode
(
੬
pg. 40).
19. • Make sure the Squeeze
mode, Cinema mode, or
Slow Shutter effect is not
activated when preparing
to use the Picture Wipe
function
(
੬
pg. 34, 45).
20. • If you want the lighting to
look more natural, set
GAIN UP to “AGC” or
“OFF” in the Recording
Menu (
੬
pg. 34).
21. • Make sure the Squeeze
mode is set to “OFF”
(
੬
pg. 34).
• Do not try to use the Video
Echo effect during a
Fade-In or Fade-Out
(
੬
pg. 38).
22. • Do not try to use the
Classic Film or Strobe
effect during a scene
transition (
੬
pg. 45).
23. • Turn off Sepia or Monotone
before setting White
Balance (
੬
pg. 44).
24.
————
25.
————
18. The Picture Wipe and
Dissolve functions don’t
work.
19. The Picture Wipe function
doesn’t work.
20. Even when Slow Shutter
isn't selected, the image
looks like it is activated.
21. The Video Echo effect
doesn’t work.
22. There is no strobe when
the Classic Film or Strobe
effect is activated.
23. White Balance cannot be
activated.
24. When shooting a subject
illuminated by bright
light, vertical lines appear.
25. When the screen is under
direct sunlight during
shooting, the screen becomes
red or black for an instant.
TROUBLESHOOTING (Cont.)