Operation modes, 1 continuous operation – JAI CB-141MCL User Manual
Page 26
CM-141MCL/PMCL/-RA / CB-141MCL/PMCL/-RA
23
Vertical timing
Fig.25 Vertical Timing for Vertical Binning
6.3. Operation Modes
This camera can operate in 5 primary modes.
1. Continuous Mode
Pre-selected exposure.
2. Edge Pre-select Mode (EPS)
Pre-selected exposure.
3. Pulse Width Control Mode (PWC)
Pulse width controlled exposure.
4. Reset Continuous
Trigger Mode(RCT) Pre-select exposure
5.Smearless EPS Mode Pre-select exposure
6.3.1 Continuous operation
For applications not requiring asynchronous external triggering, this mode should be used.
In continuous mode it is possible to use a lens with video controlled iris.
For timing details, refer to fig. 20 through fig. 25.
To use this mode:
Set function:
Trigger mode
Continuous
Scanning
Full, Partial
Vertical binning
On/Off (CM-141MCL only)
Shutter mode
Preset, Programmable, Fine Exposure
Shutter speed
1/30 to 1/10,000
Programmable exposure 2 to 1052 L