Janome MEMORYCRAFT 300E - Manual (Page 12)

11
Needle Threader
1 Lower the presser foot. Depress the needle
threader knob as far as it will go. The hook
comes out through the needle eye from behind.
1 Needle threader knob
2 Hook
2 Draw the thread down around the threader guide
and under the hook.
3 Threader guide
3 Release the threader knob slowly while holding
the thread end with your hand. A loop of the
thread is pulled up through the needle eye.
4 Remove the loop from the threader and pull out the
thread end from the needle eye.
NOTE:
The needle threader works well with the threads #50-
100 and needles #11-16, the blue tipped needle as well.
1
2
3
4
1
2
3
2