Janome MEMORYCRAFT 300E User Manual
Page 32
31
Font
AB
OK
M
L
S
AB
Mode
A Z
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
Font
OK
M
L
S
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
A
B
C
D
E
F
A Z
Number/Symbol key
(5) Number/Symbol key
When you press this key, the number and symbols
will appear. To select the number or symbol, press
the correspondent key.
Press this key again to return to the letter selection
window.
(6) Delete key
Characters can be deleted when they are
underlined by the cursor. Move the cursor under
the letter, number or symbol you want to delete and
press the delete key.
(7) Cursor keys
Slide the cursor to the right or left by pressing
either of the arrow keys. To add letters/numbers/
symbols (character) into a monogram, move the
cursor under a character. Press the new character
key and it will be inserted on the left side of the
underlined character.
(8) OK key
The selected letter/number/symbol monogram
combination is confirmed by pressing the OK key.
After the key is pressed the screen will change to
the Embroidery screen.
(9) Letter Size key
You can choose three different sizes of letters:
large, medium and small. Set the size of
monogram before selecting the alphabet.
(10) Horizontal/Vertical key
You can choose the direction of the embroidery
either horizontal or vertical.
(11) File Save key
You can save the programmed monogram by
pressing this key. The File Save window will
appear.
(12) Magnifier key
Pressing this key enlarges the Letter/Number keys
to make entry easier.
Press the Return key to return to the original
screen.
(13) Mode key
Refer to page 19.