Janome MEMORYCRAFT 300E - Manual (Page 22)

21
Mode Setting
Pressing the SET key will open the mode setting
window.
(1) SET key
Press the SET key to customize the machine
settings.
(2) Flag key (Language selection key)
Press the flag key to select the language for the
screen display. You can select one of 11
languages.
(3) Screen contrast
The visual touch screen contrast can be adjusted.
Press the plus key, to sharpen the screen
contrast.
Press the minus key, to fade the screen
contrast.
(4) Sound control
The buzzer volume can be adjusted. The volume
level can be set from (0 to 10) and the default
setting is 5.
Press the plus key, to increase the buzzer
volume.
Press the minus key, to decrease the buzzer
volume.
When you select 0 the buzzer turns off.
(5) Eco mode
After turning on the power switch, if you have not
used the machine, after a while, the machine will
enter Eco Mode. The visual touch screen will go
dark and the sewing light will turn off.
Whenever you touch the screen while the machine
is in Eco mode, the screen and sewing light will
turn on again.
You can set the Eco mode timer from 1 minute to
30 minutes. The default setting is 10 minutes.
To set the Eco Mode timer:
Press the plus key to increase the timer setting.
Press the minus key to decrease the timer setting.
To turn off the Eco mode, Press the plus key until
“OFF” shows in the box.
Edit
Mode
1 2 3 4
5 6 7 8
Designs
Hoop Size A(F): 126 X 110mm
A Z
Screen Contrast
+
inch/mm
5
+
Eco Mode
SET
inch mm
Register
10 min
(1)
(2)
(3)
(4)
(5)