Janome MEMORYCRAFT 300E - Manual (Page 28)

27
Edit
Mode
1 2 3 4
5 6 7 8
Designs
Hoop Size A(F): 126 X 110mm
A Z
Edit
Mode
1 2 3 4
Ready to Sew
A Z
Size
2
P
A(F): 126x110mm
76x62mm
13 Colors 22 min
Jog
Bamboo
Toast Hazel Brown 224 255 254 214
ST
(1)
(4)
(2) (3)
1
2
When you select an embroidery design, the Visual
Touch Screen will show the stitch image and each color
section in the design along with additional useful
information, including the sewing time in minutes, the
number of thread colors required, the size of the design,
foot and hoop size.
(1) Color/Part key
The thread color of each embroidery part and the
sewing order of each embroider is indicated on the
key.
When you start sewing, the machine will
automatically stop sewing after it finishes sewing
one part of the embroidery design.
Change the thread and start sewing again. The
color of the key will darken after you finish sewing
that part of the embroidery design.
Sewing the specific color/part by skipping
You can sew only the specific part of the design by
skipping the parts before it.
Press the color/part key previous to the part you wish to
start sewing, and the skipped parts will darken.
(2) Return key
Press this key to return to the pattern selection
window.
(3) Next page Key
The next page key will be displayed when there are
more design parts to be displayed. Press it to view
the other embroidery design parts.
(4) Jog Keys
Adjust the hoop position with the jog keys so that
the needle drop position comes right above the
center of the centerlines on the fabric.
1 Needle drop position
2 Centerlines