JVC RS-WP1WT - Manual (Page 15)

English
12
To Select a Track ————————
During playback, press the 4 or ¢ button to select the track you
want.
The selected track starts playing.
• Press the ¢ button once to skip to the beginning of the next
track.
• Press the 4 button to skip to the beginning of the track being
played. Press the 4 button twice quickly to skip to the
beginning of the previous track.
You can also select a track in Stop mode with the same buttons.
When the button is pressed, the selected track and its playback time
appear on the display. To play the CD after selecting a track, just
press the CD
6 button.
Search Play ———————————
Holding down the 4 or ¢ button, during playback, will fast
forward/backwards the CD so you can quickly find a particular
passage in the track you are listening to. During Search Play, you
can hear the sound of approx. one forth level.
Programming the
Playing Order of the Tracks
You can program the playing order of the tracks using the Remote
Control.
■
You can program up to 20 tracks in any desired order including
the same tracks.
■
You can only make a program when the CD Player is stopped.
1. Set a CD.
2. Press the CD 6 button to set the System
function to CD.
If the System function is already set to CD, go to step 4.
3. Press the 7 button to stop the CD.
4. Press the PROGRAM button.
The System enters the programming mode and the “PRGM”
indicator lights up.
5. Press the number keys to select the track to
program.
To select the track 5, press 5.
To select the track 15, press +10 then 5.
To select the track 20, press +10 once then press 10.
Example: for track 2, press 2.
6. Repeat step 5 to select the other tracks for the
program.
You can see the total playback time of the programmed tracks
on the display.
• To cancel the last track programmed, press the 7 button
once.
7. Press the CD 6 button.
The System plays the tracks in the order you have programmed
them.
■
You can skip to a particular program track by pressing the 4
or ¢ button during Program Play.
To confirm the programmed tracks while the CD player is
stopped, each press the
4 or ¢ button; the tracks making up
the program successively will be displayed in the programmed order.
To delete all the tracks in the program, press the
7 button on
the Remote Control repeatedly until all the tracks are cleared.
Turning off the power or opening the door will also clear the
programmed tracks.
To exit Program mode, while the CD Player is stopped, press the
PROGRAM button to turn off the “PRGM” indicator. To restore
Program mode, in Stop mode, press the same button to light on the
“PRGM” indicator.
Notes:
•
If the total playback time of the programmed tracks exceeds 99
minutes 59 seconds, “– –:– –” appears on the display.
• When the CD contains more than 21 tracks:
When you try to program a track number exceeding 20 (for
example the 25th track), the total playback time indication will
go out, though programming is possible.
To Modify the Program —————
Modify the contents of the program while the CD Player is stopped.
Each time you press the
7 button, the last track in the program is
deleted. To add new tracks to the end of the program, repeat above
steps 5 and 6.
Random Play
The tracks will play in no special order when you use this mode.
1. Press the RANDOM button on the Remote
Control.
The “RND” indicator lights up on the display.
2. Press the CD 6 button.
The tracks are played in random order once.
To skip a track during playback, press the ¢ button to jump
to the next track in the random sequence. Press the 4 button to
jump back to the start of a track being played.
To exit Random Play mode, press the RANDOM button to turn
off the “RND” indicator after pressing the
7 button to stop the CD
Player, or turn off the power.
Repeating Tracks
You can repeat the tracks or individual track as many times as you
like.
Press the REPEAT button on the Remote Control.
The Repeat indicator changes with each press of the button, as
shown below.
P → PALL → blank display → (back to the beginning)
P:
Repeats one track.
P ALL: In Normal Play mode, repeats all the tracks.
In Program Play mode, repeats all the tracks in the
program.
In Random Play mode, repeats all the tracks in random
order.
To exit Repeat mode, press the REPEAT button until the Repeat
indicator on the display goes out.
■
In Random Play, P cannot be selected.
■
Repeat mode remains in effect even when you change the play
mode.
PROGRAM
Program order number
(After 2 seconds)
Total playback time of the programmed tracks
PRGM