JVC RS-WP1WT - Manual (Page 16)

English
13
Using the Cassette Deck
(Listening to a Tape)
The Cassette Deck allows you to play and record audio tapes.
■
With Automatic Tape Detection, you can listen to type I, II or IV
tapes without having to change any settings.
The use of tapes longer than 120 minutes is not recommended,
since characteristic deterioration may occur and these tapes
easily jam in the pinch-rollers and the capstans.
One Touch Play —————————
This operation is effective only when the System is operated on AC
power or car battery (DC12V).
By pressing the TAPE
23 button on the System or the Remote
Control, the System will come on, “TAPE” appears on the display,
and if a tape is in the deck, it will start to play. If no tape is loaded,
insert a tape, or select other function.
Regular Play
When the power is already on, you can use this basic procedure:
1. Turn the door knob counterclockwise to open
the door, and press the 0 button to open the
cassette holder.
2. Put the cassette in, with the side you want to
listen facing toward you.
3. Push the holder to close, and close the door
gently until it clicks.
4. Press the TAPE 23 button.
The tape is played in the direction shown by the Tape Direction
indicator. The Tape Direction indicator
3 (Forward) or 2
(Reverse) blinks slowly.
3 (Forward playback):
The side of the tape facing you is played back.
2 (Reverse playback):
The opposite side of the tape is played back.
5. If you need to change the playback direction,
press the TAPE 23 button.
The opposite side Tape Direction indicator lights up and the
tape playback direction changes.
To stop playing, press the 7 button.
To remove the tape, stop the tape, open the door by turning
door knob counterclockwise, and open the cassette holder by
pressing the
0 button.
To Fast-Wind A Tape ——————
Press the ¢ or 4 button to fast-wind the tape. The Tape
Direction indicator 3 or 2 will rapidly blink on the display.
• The Cassette Deck automatically stops when the tape reaches its
end.
The following table shows the relationship between the Tape
Direction indicator and the actual tape travelling direction in
each mode. The tape travelling direction is indicated by the
blinking indicator.
[Tape Direction indicator and tape travelling direction in each mode]
*Blinking indicator shows the tape travelling direction.
Reverse Mode
You can set a tape to play just one side, both sides in succession, or
both sides continuously.
Press the REVERSE MODE button on the Remote
Control.
Each time you press the button, the Reverse mode indicator changes
as follows:
→ → → (back to the beginning)
: The Cassette Deck automatically stops after playing one
side of the tape.
: The Cassette Deck automatically stops after playing both
sides of the tape. (Stops when playback in the reverse (
2)
direction is finished.)
: The Cassette Deck continues to play both sides of the
tape until the 7 button is pressed.
VOLUME
VOLUME
AUX
TU NE R
TA PE
CD
ASP
O P EN
O N E TO UCH R E C
MULTI CONTROL
REW FF
STANDBY
CD PORTABLE SYSTEM RS-WP1
BAND
STANDBY/ON
TAPE `
4 ¢
7
A .P.OFF
SLEEP
CLOCK TIMER TIMER ON/OFF
PROGRAM
RANDOM
REPEAT
BAND
DISPLAY
AHB PRO
REVERSE MODE MULTI CONTROL
FM MODE
REW FF
RM-SRSWP1U REMOTE CONTROL
TAPE TUNER C D
DOWN UP SET
AUX
VOLUME
BASS/
TREBLE
STAND BY/ON
AUTO PRESET
TAPE `
REVERSE
MODE
4 7
¢
Reverse mode indicator
Reverse
Forward Tape direction
indicator
Stop Playback ¢ FF 4 REW
Forward 3 3 3 2 3
(Slow) (Rapid) (Rapid)
Reverse 2 2 2 2 3
(Slow) (Rapid) (Rapid)
0
When the System is in use, the display shows other
items as well.
For simplicity, we show here only the items
described in this section.
Door
knob