JVC KD-ADV6580 User Manual
Page 25
25
EXTERNAL DEVICES
ENGLISH
Connecting a device
1
Select “BT-PHONE” or “BT-AUDIO.”
2
Select “NEW DEVICE.”
3
To search for available devices:
Select ”SEARCH.”
The unit searches and displays the list of the
available devices. If no available device is detected,
“UNFOUND” appears.
To connect a special device:
Select “SPECIAL.”
The unit displays the list of the preset devices.
4
Select a device you want to connect.
5
For available devices...
1
Enter the specific PIN code of the device
to the unit.
Refer to the instructions supplied with the
device to check the PIN code.
2
Use the Bluetooth device to connect.
Now connection is established and you can use
the device through the unit.
For special device...
Use “OPEN” or “SEARCH” to connect.
Connecting/disconnecting/deleting a
registered device
1
Select “BT-PHONE” or “BT-AUDIO.”
2
Select a registered device you want to
connect/disconnect/delete.
3
To connect/disconnect the selected device:
Select “CONNECT” or “DISCONNECT.”
To delete the selected device:
Select “DELETE,” then “YES.”
You can set the unit to connect the Bluetooth device
automatically when the unit is turned on. (See
“AUTO CNNCT” on page 47.)
EN18-27_KD-ADV6580[J]1.indd 25
EN18-27_KD-ADV6580[J]1.indd 25
1/30/09 2:08:48 PM
1/30/09 2:08:48 PM