JVC KD-ADV6580 - Manual (Page 41)

41 SETTINGS
ENGLISH
Category Menu item Selectable setting, [reference page]
MENU COLOR
• ON
• OFF
: Changes the display and button (except EQ/ / 0 ) illumination during
menu, list search, and playback mode operations.
: Cancels.
RING COLOR
* 8 • ON
• OFF
: When a call comes in, the display will flash in blue.
• The display will change to the original color when you answer the call or the
incoming call stops.
When the unit receive a text message, the display only illuminates in blue.
: Cancels.
AUDIO
FADER * 9
Fader
R06 – F06 : Adjust the front and rear speaker output balance.
(Initial: 00)
BALANCE
Balance L06 – R06 : Adjust the left and right speaker output balance.
(Initial: 00)
LOUD
Loudness • LOUD ON
• LOUD OFF
: Boost low and high frequencies to produce a well-balanced
sound at a low volume level.
: Cancels.
VOL ADJUST
Volume adjust VOL ADJ –05
—
VOL ADJ +05
(Initial: VOL
ADJ 00) : Preset the volume adjustment level of each source (except
FM), compared to the FM volume level. The volume level
will automatically increase or decrease when you change the
source.
• Before making an adjustment, select the source you want
to adjust.
• “VOL ADJ FIX” appears on the display if “FM” is selected as
the source.
BEEP
Key touch tone • BEEP ON
• BEEP OFF : Activates the keypress tone.
: Deactivates the keypress tone.
AMP GAIN * 10
Amplifier gain
control
• LOW POWER
• HIGH POWER
• Off
: VOLUME 00 – VOLUME 30 (Select if the maximum power
of each speaker is less than 50 W to prevent damaging the
speaker.)
: VOLUME 00 – VOLUME 50
: Deactivates the built-in amplifier.
* 8 Displayed only when Bluetooth adapter, KS-BTA200 is connected.
* 9 If you are using a two-speaker system, set the fader level to <00>.
* 10 The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the volume level
set higher than “VOLUME 30.”
Continued on the next page
EN38-47_KD-ADV6580[J]f.indd 41 EN38-47_KD-ADV6580[J]f.indd 41 2/27/09 3:43:49 PM 2/27/09 3:43:49 PM