JVC KD-ADV6580 - Manual (Page 59)

59 REFERENCES
ENGLISH
Symptoms Remedies/Causes
iPod/iPhone
• The iPod does not turn on or does not work. • Check the connecting cable and its connection.
• Update the firmware version of the iPod/
iPhone.
• Charge the battery of the iPod/iPhone.
• Reset the iPod/iPhone.
• Check whether <IPOD SWITCH> setting is
appropriate (see page 42).
• The sound is distorted. Deactivate the equalizer either on this unit or the
iPod/iPhone.
• No sound can be heard in <IPOD MODE>. Check whether <IPOD SWITCH> setting is
appropriate (see pages 42 and 50).
• Playback stops. The headphones are disconnected during
playback. Restart the playback operation (see
page 32).
• “CANNOT PLAY” appears on the display. No tracks are stored. Import tracks to the
iPod/iPhone.
• “RESTRICTED” appears on the display. Check whether the connected iPod/iPhone is
compatible with this unit (see page 50).
Only when connecting with the interface adapter
• “NO FILES” appears on the display. No tracks are stored. Import tracks to the iPod.
• The iPod’s controls do not work after
disconnecting from this unit.
Reset the iPod.
• “NO IPOD” appears on the display. • Check the connecting cable and its connection.
• Charge the battery.
• No sound can be heard when connecting
an iPod nano.
• Disconnect the headphones from the iPod
nano.
• Update the firmware version of the iPod nano.
• “RESET 1” – “RESET 7” appears on the
display.
Disconnect the adapter from both this unit and
iPod. Then, connect it again.
• “RESET 8” appears on the display. Check the connection between the adapter and
this unit.
JVC bears no responsibility for any loss of data in an iPod/iPhone and/or USB mass storage class
device while using this System.
EN56-61_KD-ADV6580[J]f.indd 59 EN56-61_KD-ADV6580[J]f.indd 59 2/27/09 3:48:42 PM 2/27/09 3:48:42 PM