Jaguar XK JJM 18 02 30 701 - Manual (Page 50)

Starting the Engine
50
L
Chapter 2
KEYLESS STARTING
!
WARNING:
Before starting the engine, check the
parkbrake is ON and the gear selector
is in position P.
With the brake pedal depressed, press
the START/STOP button to start the
engine. All systems will become
functional.
Note: If the fuel system inertia switch has
been tripped, the ignition system will be
isolated, see page 223.
If the engine persistently fails to start,
press the START/STOP button to turn the
ignition system back to convenience
mode. Slowly depress the accelerator
pedal fully, hold it in this position and
press the START/STOP button with the
brake pedal applied, the engine will start
to crank. Release the accelerator pedal
when the engine starts.
Note: If the Jaguar Smart Key is placed in
the door pocket it will be outside the
range of the sensors when the door is
opened.
When pressing the engine START/STOP
button to start the engine, if the security
status light, on the top surface of the
instrument panel, remains flashing, a fault
condition is indicated. Seek qualified
assistance as soon as possible.
Ignition system ON, non-engine start
To turn on the ignition system without
starting the engine, press the
START/STOP button without pressing the
brake pedal. All systems will become
functional.
Rolling re-start
If the engine is switched off while the
vehicle is moving, a rolling re-start can be
initiated by selecting neutral, N, and
pressing the engine START/STOP button.
SWITCHING OFF THE ENGINE
Caution: Never switch OFF the engine
whilst the vehicle is in motion.
With the gear selector in position P, press
the engine START/STOP button. The
engine will stop and the electrical system
will return to the convenience mode. The
audio, telephone and touch-screen
systems will revert to stand-by mode.
Pressing the START/STOP button again
will activate the systems.
JAG0503N