Jaguar XK JJM 18 02 30 701 - Manual (Page 97)

Child Safety
106
L
4. Push down on the child seat to ensure
any slack is taken in by the
mechanism.
The above is a guide only. Depending on
the features of a particular child seat, e.g.
forward or rearward-facing, engage the
locking device before or after attaching
the belt, as convenient.
Unbuckling the belt and releasing the
child seat will allow the belt to resume its
normal operation.
General check list
Follow the check list each time your child
travels in the vehicle:
• Carefully follow the instructions
provided by the manufacturer of the
restraint system.
• Make sure your child falls into the
correct weight range for the seat.
• Always use the appropriate child
restraints and adjust harnesses for
every child, every trip.
• Avoid dressing your child in bulky
clothing and do not place any objects
between the child and the restraint
system.
• Regularly check the fit of your child
seat and replace seats or harnesses
that show signs of wear.
• No child seat is completely
child-proof. Encourage your child not
to play with the buckle or harness.
• Never leave a child unsupervised in
the vehicle.
• Ensure your child does not exit the
vehicle from the side where there is
traffic.
• Set your child a good example –
always wear your seat belt.
• Ensure that you have removed all
slack from the adult seat belt.
Child restraint top tether anchorages
and brackets
(Coupe only)
The top tether brackets are positioned on
the rear parcel shelf, under access
covers, at the centre-line of each rear
seating position.
Lift the top tether cover and connect the
top tether to the bracket on the rear shelf.
Adjust the length of the top tether strap to
hold the top of the child seat against the
vehicle seat back.
LATCH ANCHOR POINTS
(Lower Anchorages and Tethers for CHild
restraints)
JAG0192G