JVC PU30425 - Manual (Page 20)

20
TV signals being received by the recorder’s built-in tuner can be
recorded onto a video tape. You can “capture” a TV programme
using your video recorder.
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
● The counter is reset to 0:00:00 and the recorder
power comes on automatically.
CHOOSE A PROGRAMME
2
Press TV PROG. +/– or the NUMBER keys to select the
preset you wish to record. The name of the station
appears in the recorder’s display panel for 5 seconds,
followed by the preset position number. (Only stations
that appear in the Confirmation screen will be displayed.)
● The TV PROG. dial can also be used to select a preset.
SET TAPE SPEED
3
Press SP/LP. Check the SP/LP indicator on the recorder
display panel to confirm the selected tape speed.
● Picture quality of LP recordings will not be as high as
SP recordings.
START RECORDING
4
Press and hold RECORD and PLAY on the remote
control, or press RECORD on the recorder.
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
RECORDING
Basic
Recording
1 2
4 5
3
6
8
0
7 9
2
1
3
6
q
PAUSE
TV PROG.
PAUSE
SP/LP
SP/LP
PLAY STOP/EJECT
6 5
2
5
4,5
3
5
TV PROG.
RECORD
4
3
PLAY
RECORD
4
STOP 6
TV PROG.
2
NUMBER
2
B.E.S.T. takes place at the beginning of both the
first SP and the first LP recording after inserting the
cassette (
੬
pg. 21).
Accidental erasure prevention
● To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab