JVC PU30425 - Manual (Page 35)

35
You can use a camcorder as the source player and your video
recorder as the recorder.
Edit From A
Camcorder
MAKE CONNECTIONS
1
Connect the camcorder’s AUDIO/VIDEO OUT
connectors to the recorder’s front panel AUDIO/VIDEO
input connectors.
● When a Master Edit Control-equipped JVC camcorder
is used, the camcorder is capable of controlling the
recorder. Refer to the camcorder’s instruction manual
for operating procedure.
SET RECORDER’S INPUT
MODE
2
Press NUMBER key “0”. “F-AU” appears in place of a
preset number.
START CAMCORDER
3
Engage its Play mode.
START RECORDER
4
Engage its Record mode.
NOTE:
Connections made to the front panel AUDIO/VIDEO input
connectors automatically override those made to the rear panel
AUDIO/VIDEO input connectors.
1 2
4 5
3
6
8
0
7 9
2
1
3
NUMBER "0"
6
q
Player
EDIT
Recorder Your recorder
Audio Cable
(not provided)
Editing Cable
(not provided)
To the rear panel PAUSE/
R.A. EDIT connector
AUDIO
IN VIDEO
IN
VIDEO OUT
AUDIO OUT
Video Cable
(not provided)