JVC PU30425 - Manual (Page 24)

24
RECORDING (cont.)
Recording
Features
Record One Programme
While Watching Another
SELECT PRESET TO WATCH
1
Once recording is in progress, all you need to do is to
set the preset controls on the TV for the station you
wish to view.
● The programme selected with the TV’s preset controls
appears on the TV screen while the one selected with
the TV PROG. or PUSH JOG
%fi buttons is recorded
on the tape.
Receiving NICAM Stereo
And Bilingual Programmes
Your recorder is equipped with a digital stereo sound decoder
for reception of NICAM stereo and bilingual broadcasts.
● When you switch to a channel that is broadcasting in stereo,
"NICAM" and "ST" (stereo) appear on screen for a few seconds.
● When you switch to a channel that is broadcasting a bilingual
programme, "NICAM" and "BIL" (Bilingual) appear on screen
for a few seconds.
● When you switch to a channel broadcasting a monaural
programme, "NICAM" appears on screen for a few seconds.
NOTES:
● "ON SCREEN" must be set to "ON" or the on-screen displays
will not appear (
੬
pg. 23).
● Bilingual programmes are not currently broadcast in the U.K.
1 2
4 5
3
6
8
0
7 9
2
1
3
6
q
PUSH JOG
TV PROG.
AUDIO MONITOR
TV PROG.
To Record NICAM Stereo
And Bilingual Programmes
The NICAM audio programme will be recorded on the Hi-Fi
audio track, and the Standard audio programme on the Normal
audio track.
● To listen to a stereo programme, press AUDIO MONITOR
until "L+R" appears on the front panel.
● To listen to a bilingual programme, press AUDIO MONITOR
until either "HI FI L" or "HI FI R" appears on the front panel (as
required).
● To listen to the Standard audio programme, press AUDIO
MONITOR until "NORM" appears on the front panel.
NOTES:
● If the NICAM stereo signal becomes weak, the broadcast is
automatically recorded in monaural for better quality.
● Before playing back a programme recorded in NICAM stereo,
or a bilingual programme, refer to "Soundtrack Selection"
(
੬
pg. 18).