JVC HD-DH5US - Manual (Page 14)

Masterpage:Left-FullCol
14
EN
Filename [HM-DH5U_Eng.fm]
INSTALLING YOUR NEW VCR (cont.)
NOTES:
• If you have made a component video connection and your TV’s component video connectors support only high definition signal
format, connect also the S-VIDEO or VIDEO connectors between the VCR and TV in order to view the picture of 480i image format
output from the VCR.
• Through the component video connection and if your TV’s component video connectors support only the progressive video input
and not high definition video input, you can set “TV OUTPUT 2” to “ALLto480p” (
A page 65) or “480i to 480p” to “ON”
( A page 65) to enjoy high quality picture.
The progressive mode indicator [q] on the front display panel will light up when the video output is in progressive mode.
• Use the commercially available i.LINK cable (4-pin, S400, below 3m). If the cable used is above 3m, this VCR will not fully
maximize its performance.
• To connect the antenna for the Digital Set Top Box, refer to the instruction manual for Digital Set Top Box.
REMOTE PAUSE/ AV COMPULINK
CABLE BOX
VHF/UHF
IN
ANTENNA
ANTENNA L-2
PCM/STREAM
DIGITAL AUDIO OUT
OPTICAL
P B /C B
P R /C R
Y
COMPONENT VIDEO OUT OUTPUT
HDMI OUT
D-THEATER
REGION 1
i.LINK IN/OUT
DV IN
L-1
S400
INPUT
S-VIDEO
VIDEO
L
AUDIO
R
S-VIDEO
VIDEO
L
AUDIO
R OUT
DIGITAL IN
AUDIO
VIDEO
R
L
To DTV (Component)
Output Connectors
To Audio Input
Connectors
To DTV Input
Connectors
Component Video Cable (not supplied)
Audio Cable (not supplied)
TV
(HD
Ready)
To HDMI
connector
To Audio Output
Connectors
Antenna or Cable
for digital broadcast
To i.LINK Input/
Output Connector
To Audio Output
Connectors
Audio Cable
(not supplied)
To [i.LINK
IN/OUT]
i.LINK cable
(not supplied)
Back of VCR
Antenna
or Cable
Flat Feeder
Coaxial
Cable
To [ANTENNA
IN] (Antenna or
cable input)
To Audio Input
Connectors
To
Component
Video
Connectors
To [ANTENNA
OUT]
To [AUDIO OUTPUT]
Audio Cable (supplied)
Component Video Cable (not supplied)
To
[COMPONENT
VIDEO OUT]
HDMI Cable (not supplied)
OR
To
[HDMI
OUT]
To 75 K terminal
Digital Set Top Box
AC Outlet
To S-Video Output
Connector
S-Video Cable
(supplied)
Matching Transformer
(not supplied)
To [S VIDEO
INPUT] To
[AUDIO INPUT]
To [HDMI OUT]
HDMI to DVI conversion cable
(commercially available, not
supplied)
When your TV has only DVI input, you can use a commercially
available HDMI to DVI conversion cable to connect between the
VCR and your TV.
To DVI
connector
HM-DH5U_Eng.fm Page 14 Friday, June 25, 2004 11:42 AM