JVC HD-DH5US - Manual (Page 31)

Masterpage:Right-FullCol
EN
31
Filename [HM-DH5U_Eng.fm]
E
Automatic operations after
rewinding
— Next Function Memory
The Next Function Memory tells the VCR what to do after
rewinding is complete.
• Ensure that the VCR is in stop mode.
a– For Automatic Playback Start
Press [REW (O)], then press [PLAY (I)] within 2
seconds.
b– For Automatic Power Off
Press [REW (O)], then press [POWER] within 2
seconds.
c– For Automatic Timer Standby
Press [REW (O)], then press [TIMER (j)] within 2
seconds.
NOTE:
It is not possible to select the Automatic Timer Standby function
if the cassette’s record safety tab is removed.
F
Locating beginning of recordings
— Index Search
When recording on this VCR, index codes are placed on
the tape at the beginning of each recording. You can find
and automatically play back from the beginning of any
recording using the Index Search function.
1
Start search
While the tape is not running, press [S]or [T]
on the Remote or the front panel.
2
Access distant code
To access a recording of 2 to 9 index codes away,
press [S]or [T] repeatedly until the correct
number is displayed on the screen (only if
“SUPERIMPOSE” is set to “ON” (A page 66)).
Playback begins automatically when the desired
recording is located.
•
If you want to find the very beginning of the desired
program, press [REW (Q)] or [FF (P)] after playback
starts.
NOTE:
An index code is not placed on the tape when recording is
resumed from recording pause.
G
Skipping unwanted portions
— Skip Search
You can skip over (view at high speed) unwanted
portions of the tape.
Press [SKIP SEARCH] on the Remote once to 6 times
during playback.
Each press initiates a 30-second period of high speed
playback (up to 3 minutes). When the specified portion of
the tape is skipped, normal playback resumes
automatically.
To return to normal playback during Skip Search, press
[PLAY (I)].
1 1 2 2 3
S T
Beginning of the
2nd next program
recorded Current position
on the tape Beginning of the current
program recorded
Previous
program
recorded Next
program
recorded
2nd next
Other Useful functions for playback
(S-VHS/VHS only)
You can also use the following functions for playback.
• “V. CALIBRATION” (A page 63)
When this function is set to “ON”, this VCR checks
the condition of the tape in use during playback and
recording, and compensates to provide the highest-
possible pictures.
• “PICTURE CONTROL” (A page 63)
This function helps you to adjust the playback
picture quality according to your preference.
• “VIDEO STABILIZER” (A page 63)
You can automatically correct vertical vibrations in
the picture when playing back unstable recordings
made on another VCR.
HM-DH5U_Eng.fm Page 31 Friday, June 25, 2004 11:42 AM