JVC HD-DH5US - Manual (Page 86)

Masterpage:Left-FullCol
86
EN
Filename [HM-DH5U_Eng.fm]
TROUBLESHOOTING (cont.)
Questions and answers
PLAYBACK
Q. What happens if the tape reaches its end during
playback or search?
A. The VCR automatically rewinds it to the beginning.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. Can the VCR indefinitely remain in still mode?
A. No. It stops automatically after 5 minutes to protect
the heads.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. During picture search, still picture playback and
frame-by-frame playback, the picture is intermittent.
What’s the cause?
A. Picture loss occurs when these types of playback are
attempted with a tape recorded in LP mode. Pressing
[PLAY (I)] to return to normal playback will restore
the picture.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. When returning from variable-speed picture search
to normal playback, the picture is disturbed. Should
I be concerned about this?
A. No, it is normal.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. When playing back programs that have been timer-
recorded consecutively (such that one program from
8:00 to 9:00 and another one from 9:00 to 10:00),
the picture and sound become momentarily
distorted where the first program ends and the
second program begins. Is this a malfunction?
A. No. This is normal.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. Other than preventing further recording, what effect
does removing the safety tab have?
A. It disables marking of index codes and tape numbers
for Video Navigation.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. Sometimes, during index search, the VCR cannot
find the program I want to see. Why not?
A. There may be index codes too close together.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. During playback, on-screen display sometimes
jitters. Why does this happen?
A. If the condition of the tape being played back is not
good, jittering of the video (including on-screen
display) may occur.
RECORDING
Q. When I pause and then resume a recording, the end
of the recording before the pause is overlapped by
the new recording. Why does this happen?
A. This is normal. It reduces distortion at the pause and
resume points.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. Can the VCR indefinitely remain in the recording
pause mode?
A. No. The VCR automatically stops after 5 minutes to
protect the heads. When paused during Instant Timer
Recording (ITR), the VCR shuts off automatically after
5 minutes.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. What happens if the tape reaches its end during
recording?
A. The VCR stops, then [X] and [E] blink on the front
display panel.
TIMER RECORDING
Q. [X] and [j] remain lit on the front display panel. Is
there a problem?
A. No. This is a normal condition for a timer recording
in progress.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. Can I program the timer while I’m watching a tape
or a TV broadcast?
A. Yes, but while you are setting the timer you will not
see the tape’s or broadcast program’s picture as it is
replaced by the on-screen menu. (The sound from the
tape or broadcast program will be heard during the
timer setting.)
HM-DH5U_Eng.fm Page 86 Friday, June 25, 2004 11:42 AM