Jensen BT360 - Manual (Page 16)

Operation with multiple paired phones
12
.
When the ignition is turned on the BT360 begins to search for paired
phones. Priority is given to the most recently connected phone
Example: Phone A is connected first, phone B is connected second
and phone C is connected third. If all three phones are in the car
when the ignition is turned on phone C will establish a connection
with the BT360.
Note: If phone C is turned off or if the person using it leaves the car
and goes out of range the connection will be broken. In order to
establish another connection with one of the remaining phones,
press the answer/redial button once or restart the ignition. The
BT360 performs another search and establishes a connection with
the most recently connected phone, in this example phone B.
Resetting the Car Kit
If for any reason you need to reset the BT360 back to the factory
settings and delete all paired phones, follow these instructions.
Master Reset
Æ
M. Reset