Jensen BT360 - Manual (Page 21)

Bluetooth Car Kit User Manual
17
to re-record the voice tag while you are in the car. This will set not
only the way you say the voice tag, but also record a familiar
background noise.
Since phones are in continual contact with the Car Kit, it is possible
to use the included Car Kit’s microphone to record the voice tag.
Locate the feature on your mobile phone, and when prompted for
the voice tag, speak clearly from a comfortable position in the
driver’s seat.
Note: Some phones have speaker independent voice recognition
technology and do not require users to pre-record voice tag. Refer to
your phones users’ manual for more specific information.
Updating the Bluetooth Software
The BT360 has the ability to be upgraded to give you many years of
use and to be compatible with newer versions of phones. There is a
complete manual that explains the upgrade process available at
WWW.JENSEN.COM . We do not recommend entering this mode
without first downloading the upgrade information and reading it
completely. It is possible to render your car kit in-operable if you do
not complete this process correctly. This would not be covered
under warranty as it would not be considered a defect.
To enter upgrade mode, hold the Volume UP and Down keys and
then power on the BT360. The display will show “BT Update”